DC Drive Drilling Rig/ Jackup Rig 1500-7000m
Motocin DC ne ke tafiyar da aikin zane, tebur na jujjuyawar da kuma famfon laka, kuma ana iya amfani da na'urar a cikin rijiyar mai zurfi da aiki mai zurfi mai zurfi a bakin teku ko na teku.
• Ana iya sanye shi da na'urar tuƙi.
• Ana iya sanye shi da gabaɗayan layin dogo mai motsi ko na'ura mai hawa don biyan buƙatun motsi tsakanin wuraren rijiyoyi yayin da ake gudanar da hakowa tari.
Nau'in da Babban Ma'auni na DC Drive Drilling Rig:
| Nau'in | ZJ40/2250DZ | Saukewa: ZJ50/3150DZ | Saukewa: ZJ70/4500DZ | ZJ90/6750DZ | |||
| Zurfin hakowa mara kyau(114mm diamita tube) | 2500-4000 | 3500-5000 | 4500-7000 | 6000-9000 | |||
| Max. kawo, KN | 2250 | 3150 | 4500 | 6750 | |||
| Max. layin layin tsarin tafiya | 10 | 12 | 12 | 14 | |||
| mm (a) Hakowa waya Dia. | 32 (1 1/4) | 35 (1 3/8) | 38 (1 1/2) | 45 (1 3/4) | |||
| Sheave OD na tsarin tafiya | 1120 (44) | 1270(50) | 1524(60) | 1524(60) | |||
| Swivel mai tushe ta hanyar rami Dia. | 75(3) | 75(3) | 75(3) | 102(4) | |||
| Ƙarfin ƙira na aikin zane KW(hp) | 735 (1000) | 1100 (1500) | 1470 (2000) | 2210 (3000) | |||
| Zane yana canzawa | 4 | 4 | 4 | 4 | |||
| Bude Dia. na Rotary tebur | 698.5 (27 1/2) | 698.5 (271/2) | 952.5 (37 1/2) | 952.5 (37 1/2) | 952.5 (37 1/2) | 1257.3 (49 1/2) | |
| Juyawa tebur canje-canje | 2 | 2 | 2 | 2 | |||
| Ƙarfin famfo guda ɗaya | 960 (1300) | 960 (1300) | 1180 (1600) | 1180 (1600) | 1620 (2200) | ||
| Mast aiki tsayi | 43 (142) | 45 (147) | 45 (147) | 48 (157) | |||
| Haɗa tsayin bene | 7.5 (25) | 7.5 (25) | 9 (30) | 9 (30) | 10.5 (35) | 10.5 (35) | 12 (40) |
| Bayyana tsayin benen haƙori | 6.26 (20.5) | 6.26 (20.5) | 7.62 (25) | 7.42 (24.5) | 8.92 (29.5) | 8.7 (28.5) | 10 (33) |
| Lura | DZ--DC tuki mai hakowa | ||||||
Samfura masu alaƙa
-
AC VF Drlling Rig 1500-7000m
• Zane-zane suna ɗaukar babban mota ko mota mai zaman kanta don cimma hakowa ta atomatik da yin sa ido na gaske don aiki da yanayin hakowa. • Kula da matsayi na toshe balaguron balaguro yana da aikin hana "bump sama da fashe ƙasa". • Rigar hakowa tana sanye take da dakin sarrafa mai mai zaman kanta. Ana iya daidaita iskar gas, lantarki da na'ura mai aiki da karfin ruwa, sigogin hakowa da nunin kayan aiki tare da juna ta yadda zai iya cimma ...
-
Rijiyar Mota don Hako Rijiyar Mai
Jerin na'urorin da aka yi amfani da su na kai tsaye sun dace don saduwa da bukatun aiki na hakowa 1000 ~ 4000 (4 1/2 "DP) mai, gas da rijiyoyin ruwa. Nau'in gabaɗaya yana ɗaukar fasalulluka na abin dogaro, aiki mai sauƙi, sufuri mai dacewa, ƙarancin aiki da kashe kuɗi, da sauransu. ) DP 500~800 700~1400 1100~1800 1500~2500 2000~3200 ...
-
Injin Drilling Rig
Zane-zane, teburi na jujjuyawar da kuma famfunan laka na injin hakowa na injin dizal ana sarrafa su ta hanyar fili, kuma ana iya amfani da na'urar don haɓaka filin mai da iskar gas a ƙasa mai zurfin rijiyar mita 7000. Nau'in Kayan Kayan Kayan Kayan Kayan Kayan Kayan Wuta: Nau'in ZJ20/1350L(J) ZJ30/1700L(J) ZJ40/2250L(J) ZJ70/4500L Nau'in hakowa mai lamba 1200-20003-0050 0 4500-7000 Max. ƙugiya kaya KN 1350 ...
-
Workover Rig don toshe baya, ja da sakewa...
General Description: Workover rigs sanya ta mu kamfanin an tsara da kerarre daidai da matsayin API Spec Q1, 4F, 7K, 8C da kuma dacewa matsayin RP500, GB3826.1, GB3826.2, GB7258, SY5202 kazalika "3C" mizanin dole. Dukan aikin rig ɗin yana da tsari mai ma'ana, wanda kawai ya mamaye ƙaramin sarari saboda babban matakin haɗin kai. Babban kaya 8x6, 10x8, 12x8, 14x8 na yau da kullun tuki mai sarrafa kansa da tsarin sarrafa wutar lantarki ...