Bututun Hako Mai na API 3.1/2"-5.7/8" don haƙo Mai / Gas
Gabatarwar Samfuri:
Kamfaninmu ya ƙware wajen samarwa da sayar da bututun haƙa mai na API na yau da kullun tare da OD daga 2 3/8 zuwa 5 1/2 da kuma matakin daga E75 zuwa S135. Kuma ana amfani da bututun haƙa mafi yawa wajen gina rijiya mai zurfi ta tsakiya, rijiya mai kwance, da kuma rijiyar da aka faɗaɗa a cikin aikin bincike da haɓaka mai da iskar gas. Tare da halayen gaba ɗaya na kyakkyawan ƙarewa a saman, sassauci mai kyau, juriyar tasiri mai kyau, mannewa mai kyau da juriyar tsatsa, bututun haƙa suna da tan dubu 10 na ƙarfin aiki na shekara-shekara.
Sigogi na Fasaha:
| Girman da aka ƙayyade
| Nauyin da aka ƙayyade | Jikin bututu | Haɗin kayan aiki | |||
| Matsayi | Nau'in ɓacin rai
| OD | Kauri a bango | Nau'in zare | ||
| 2 3/8 | 6.65 | EXG | EU | 60.32 | 7.11 | NC26 |
| 2 7/8 | 10.4 | EXGS | EU | 73.02 | 9.19 | NC31 |
| 3 1/2 | 13.3 | EXGS | EU | 88.9 | 9.35 | NC38 |
| EXG | 11.4 | |||||
| 15.5 | S | NC40 | ||||
| 4 | 14 | EXGS | IU | 101.6 | 8.38 | |
| EXGS | EU | NC46 | ||||
| 4 1/2 | 16.6 | EXGS | IEU | 114.3 | 8.56 | |
| 20 | EXGS | 10.92 | ||||
| 16.6 | EXGS | EU | 8.56 | NC50 | ||
| 20 | EXGS | 10.92 | ||||
| 5 | 19.5 | EXGS | IEU | 127 | 9.19 | |
| 25.6 | EXGS | 12.7 | ||||
| 19.5 | EXGS | 9.19 | 5 1/2FH | |||
| 25.6 | EXGS | 12.7 | ||||
| 5 1/2 | 21.9 | EXGS | 139.7 | 9.17 | ||
| 24.7 | EXGS | 10.54 | ||||
| 6 5/8 | 25.2 | EXGS | 168.28 | 8.38 | 6 5/8FH | |
| 27.7 | EXGS | 9.19 | ||||
Kayayyaki masu alaƙa
-
Bututun Ramin Rami Mai Lalacewa da Karkace
An yi abin wuyan haƙa ramin ne da ƙarfe mai siffar AISI 4145H ko ƙarfe mai kama da ƙarfe mai kama da ƙarfe, wanda aka sarrafa shi bisa ga ƙa'idar API SPEC 7. A cikin dukkan tsarin samar da abin wuyan haƙa ramin, ana iya gano bayanan gwajin aikin kowane abu, daga wurin aiki, maganin zafi zuwa zare mai haɗawa da sauran tsarin ƙera shi. Gano abin wuyan haƙa ramin yana daidai da ƙa'idar API. Duk zaren ana yin maganin phosphatization ko plating na jan ƙarfe don ƙara yawan haɗin su...
-
Maganin Dumama na Ciki na Epoxy FRP
Ana samar da layukan saman HP da bututun ƙasa da aka ƙarfafa da zare na epoxy da aka yi da filastik da aka yi da ƙarfe mai kauri da kuma bututun ƙasa bisa ƙa'idodin API. Tsawon fitarwa na shekara-shekara ya kai kilomita 2000 tare da diamita daga DN40 zuwa DN300mm. Layin saman epoxy FRP HP yana da daidaitattun hanyoyin haɗin zare mai zagaye na API a cikin kayan haɗin kai, waɗanda juriyarsu ta lalacewa ke ƙara tsawon aikin bututu. Tubin ramin epoxy FRP wani nau'i ne na babban aiki, ƙarfin juriya mai ƙarfi na bututun FRP ac...
-
Bututun Rawar soja Mai Nauyi (HWDP)
Gabatarwar Samfura: An yi bututun haƙa mai nauyi mai nauyi mai haɗin gwiwa daga ƙarfe mai tsari na AISI 4142H-4145H. Fasahar kera tana yin aiki sosai a ƙa'idodin SY/T5146-2006 da API SPEC 7-1. Sigogi na Fasaha don Bututun Haƙa Mai Nauyi: Girman Jikin Bututu Haɗin Kayan aiki Inganci ɗaya Kg/Piece OD (mm) ID (mm) Girman da ba a iya jurewa Nau'in zare OD (mm) ID (mm) Tsakiya (mm) Ƙarshe (mm) 3 1/2 88.9 57.15 101.6 98.4 NC38 120...
-
Bututun bututun API da bututun bututun mai
Layin samar da bututun ƙarfe mai laushi wanda aka yi da zafi mai birgima yana amfani da bututun Arccu-Roll mai inganci don samar da casing, bututu, bututun haƙa rami, bututun ruwa da bututun ruwa, da sauransu. Tare da tan dubu 150 na ƙarfin shekara-shekara, wannan layin samarwa zai iya samar da bututun ƙarfe mara sulɓi wanda ke da diamita na 2 3/8" zuwa 7" (φ60 mm ~ φ180mm) da matsakaicin tsawon 13m.
-
Bututun Karfe Mai Zafi Mai Daidaici
Layin samar da bututun ƙarfe mai laushi wanda aka yi da zafi mai birgima yana amfani da bututun Arccu-Roll mai inganci don samar da casing, bututu, bututun haƙa rami, bututun ruwa da bututun ruwa, da sauransu. Tare da tan dubu 150 na ƙarfin shekara-shekara, wannan layin samarwa zai iya samar da bututun ƙarfe mara sulɓi wanda ke da diamita na 2 3/8" zuwa 7" (φ60 mm ~ φ180mm) da matsakaicin tsawon 13m.